1400℃ vacuum furnace?
真空氣氛燒結爐是在真空環境中對被加熱物品進行保護性燒結的爐子,。不同的材料選擇適宜的氣氛燒結,有助于燒結過程,提高制品致密化程度、獲得良好的性能的制品。真空氣氛爐常用的有真空、氫、氧、氮和惰性氣體(如氬)等各種氣氛。例如透明氧化鋁陶瓷可用氫氣氛燒結,透明鐵電陶瓷宜用氧氣氛燒結,氮化物陶瓷如氮化鋁等宜用氮氣氛燒結。有時為保護燒結調協也須在保護氣氛中操作。如鉬絲爐宜通氫,鎢絲爐宜在真空條件下工作。
Vacuum atmosphere sintering furnace is a furnace that conducts protective sintering of heated items in a vacuum environment,. Choosing appropriate atmosphere sintering for different materials is beneficial for the sintering process, improving the degree of densification of products, and obtaining good performance products. Vacuum atmosphere furnaces commonly use various atmospheres such as vacuum, hydrogen, oxygen, nitrogen, and inert gases (such as argon). For example, transparent alumina ceramics can be sintered in a hydrogen atmosphere, transparent ferroelectric ceramics should be sintered in an oxygen atmosphere, and nitride ceramics such as aluminum nitride should be sintered in a nitrogen atmosphere. Sometimes, in order to protect sintering coordination, it is also necessary to operate in a protective atmosphere. If the molybdenum wire furnace is suitable for hydrogen supply, the tungsten wire furnace should work under vacuum conditions.
主要技術參數
Main technical parameters
| Name |
1400℃ vacuum furnace |
| Voltage | Single phase 208 - 240 VAC / 50/60Hz, (25 A breaker installed) |
| Working Temperature | <= 1400 °C continuously |
| Max. 1300 °C, < 30 minutes | |
| Temperature Uniformity: +/- 2°C | |
| Heating Rate | Max. 20°C/ min |
| Recommended. 10°C/ min | |
| Heating Elements | High quality Sic rod as heating elements and can be heated up to 1400°C. |
| Working size | 100 100 100mm/200 150 150mm/dia250/300mm Support customzied |
| Vacuum Flange |
Stainless steel vacuum flange with dual high temperature silicone O-rings at front door. |
| One needle valve is built into the flange for use as gas inlet. | |
| Digital Vacuum Gauge |
Digital vacuum meter with wide range up to 10-4 torr is included for vacuum pressure measurement. |
| Vacuum Pressure |
Vacuum Level is dependent on the vacuum pump used, connected pipe, interior efractory block's materials etc. By using KFD25, stainless steel pipe,two stage mechanical pump and KF25 Ball valve, the furnace can achieve vacuum levels below: |
| 10 mtorr (10-2 torr)via mechanical pump within 30 minutes | |
| 60 mtor(6x10-2 torr ) via mechanical pump within 30 minutes | |
| Spare sealing O-ring is available at extra cost | |
| Gas Flow And Pressure | Inert gas and oxygen gas flow can be introduced into the chamber via the inlet |
|
You may choose a gas mixer to deliver multiple gases with control over gas composition and flow-rate |
|
|
There is a gas inlet (1/4" house adapter ) with a valve on left side of furnace Inert gas and oxygen gas flow can be introduced into the chamber via the inlet |
|
| Temperature Controller | PID automatic control and auto-tune function. |
| 50 programmable segments for precise control of heating rate, cooling rate and dwell time. | |
| Over temperature protection and alarm allows for operation without attendant(s). | |
| +/- 1 oC temperature accuracy. | |
| RS485 Communication Port. |


















??售前客服